Wednesday, November 28, 2012

Program a Dish Network Remote



How to Program the DISH Network Remote


By Abby Vaun, eHow Contributor 

How to Program the DISH Network Remote thumbnail
Dish Network subscribers get a univeral remote along with their satellite dish receiver.
When you subscribe to Dish Network satellite service the company provides a satellite receiver and remote control. The provided remote comes automatically programmed to control the receiver. You can also program the remote to control your television, DVD player and other electronic devices, removing the need for multiple remotes. Often, a Dish Network technician programs the remote for you at the time of installation. However, if this is not the case or you have a new television or DVD player, you can program the remote yourself.

Instructions

    • 1
      Turn on your Dish Network receiver and the device to which you want to program the remote.
    • 2
      Press and hold the mode button on the remote control for the device you are programming. For example, press and hold the “TV” button if you are programming the remote control for your television.
    • 3
      Release the mode button when all the mode buttons light up.
    • 4
      Enter the three-digit code for your device. The codes are listed by brand and found in the user manual for your remote control or online at the Dish Network website. Often, each brand has more than one code. Use the first one listed.
    • 5
      Press the “#” or the “OK” button, depending on your remote control model number, on your remote. The mode button flashes three times.
    • 6
      Press the “Power” button. The device you are programming turns off.
    • 7
      Press the “Power” button again to turn on the device. Test some of the other keys to ensure your remote is programmed to the device. Try the volume and the mute buttons or the channel buttons. If these do not work, repeat steps 2 through 7 with another code for your device.

Sponsored Links

Tips & Warnings

  • If you do not have access to the codes, use your remote to scan for a code. In step 4, instead of entering the code, slowly press the down arrow button until the device turns off. Press the “#” or the “OK” button, continue with step 7.


References

Resources

  • Photo Credit Scott Olson/Getty Images News/Getty Images

Comments

View all 9 Comments
  • stevenkyMar 08, 2009
    that was easier than reading the manual!
  • stevenkyMar 08, 2009
    that was easier than reading the manual!

You May Also Like

Related Ads


thumbnail


Featured
Posted by at
Labels:

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)